• Z-Wave Plug-in Appliance Module - 2GIG-PS15Z-2

The Linear PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load.  The PS15Z-2 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module.  Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. This plug-in Appliance Module integrates with other Linear Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Specifications

•  Signal (Frequency):
908.42 MHz
•  Maximum Load:
Resistive:
 15 amps (1800 watts) maximum,
120 VAC
Motor:
 1/2 H.P. maximum, 120 VAC
Incandescent:
 600W maximum, 120 VAC
•  Range:
Up to 100 feet between the wireless controller and/or the closest
Z-Wave device
•  Z-Wave Version 4.55
•  Network Inclusion
•  Scene: Command Class
•  Security Compatible
Power Requirements
• 120 VAC, 60 Hz

Write a review

Note: HTML is not translated!
    Bad           Good

Z-Wave Plug-in Appliance Module - 2GIG-PS15Z-2

  • Product Code: 2GIG-PS15Z-2


Vendor information


0 reviews / Write a review