The Telguard TG-7FS, now available on AT&T and Verizon's LTE network, 3G/4G networks and CDMA networks. The 2016 edition and earlier of NFPA 72 allows a single, UL 864 listed TG-7FS to replace all of your customer's existing fire panel landlines. The TG-7FS can serve as the sole communications path for commercial fire alarm systems, transmitting alarm signals from the fire panel over the digital cellular network to the designated monitoring station.
On average, cellular monitoring costs the end user significantly less than a dedicated landline. Furthermore, each month they will pay you instead of the local telephone company for the communications path. For each landline they replace with a TG-7FS, their monthly communications bill decreases while your RMR increases.
True Drop-In Replacement
The TG-7FS is dial capture based so all you need to do is unplug the landline and plug in the new cellular communicator. All other aspects of the system—from the master control unit through the central station—won't notice the difference.
The TG-7FS is compliant with the 2016 and earlier editions of NFPA 72.
Meets UL 864 requirements for sole, primary or backup path communications
5-Minute and 60-Minute Supervision
For existing installations, all landlines can be swapped for a single TG-7FS because of the 5-minute supervision as well as the 60-minute supervision mode. When installed with multiple communications technologies, it is acceptable to supervise the cellular communication path just once daily.
Sole-Path Fire Solution
A single path technology like cellular typically costs less than 2 commercial plain old telephone lines. Instead of the customer paying hte phone company, they pay the integrator RMR.
Commercial Fire Cellular Alarm Communicator - TG7-FS-LTE
- Product Code: TG7-FS-LTE