The Fire-Lite ANN-80 is a compact, backlit red fire annunciator that provides system status indicators for power, alarm trouble, supervisory, and alarm silenced conditions.

The ANN-80 resembles a fire alarm control panel display and communicates with the panel over a two-wire serial interface. The annunciator is equipped with switches for remote control of critical system functions. Unauthorized operation of control switches is protected against by a built-in key switch.


  • Control switches for System Acknowledge, Signal Silence, Drill, and Reset
  • Control switches can be independently enabled or disabled at the FACP
  • Keyswitch enables/disables control switches and mechanically locks annunciator enclosure
  • Enclosure supervised for tamper
  • Local sounder can be enabled or disabled at the FACP.
  • Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels
  • Surface mount directly to wall or to single, double, or 4"square electrical box
  • Semi-flush mount to single, double, or 4" square electrical box. Use ANN-SB80KIT for angled view mounting
  • Can be remotely located up to 6,000 feet (1,800 m) from the panel
  • Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs

Technical Specifications:

  • Operating Voltage Range: 18-28 VDC
  • Current Consumption: @ 24 VDC nominal (filtered and non-resettable) - 40 mA maximum
  • Ambient Temperature: 32F to 120F

Write a review

Note: HTML is not translated!
    Bad           Good


  • Product Code: FIRE-LITE:ANN-80

Vendor information

0 reviews / Write a review

Tags: fire annunciators, fire, control panels, analog