Onkyo has declared war on distortion. The success of its campaign against noise is evident the moment you switch on the A-9070 Integrated Stereo Amplifier. New DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) dampens super high frequency distortion. Closed ground-loop circuits, HICC (High Instantaneous-Current Capability), and vibration-damping construction combine to produce a startlingly pure sound across a wide dynamic range. The unit’s four 15,000 µF capacitors keep plenty of power at the ready. Efficient parallel push-pull amplification paired with three-stage inverted Darlington circuitry works at reducing distortion to almost nil. Separate Wolfson® 192 kHz/24-bit DACs for both left and right channels improve performance. The unit is also equipped with 192 kHz/24-bit HD audio playback to handle modern formats. Four discrete amplifier modes—integrated amp, power amp, pre-amp, and split pre-amp/power amp—offer flexibility when integrating other hi-fi components. Details like an independent headphone amplifier, a phonograph equalizer, three digital audio inputs, four analog inputs, and gold-plated audio terminals/speaker posts speak of the highest build quality. The superb craftsmanship, technological refinement, and attention to detail invested in the A-9070 make it worthy of serious consideration for those in the market for top-shelf hi-fi gear.>

  • 140 Watts per Channel at 4 Ohms, 20 Hz–20 kHz, 0.05%, 2 Channels Driven, FTC
  • AWRAT (Advanced Wide Range Amplifier Technology)
  • DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry)
  • Parallel Push-Pull Amplification Design with Three-Stage Inverted Darlington Circuitry
  • 192 kHz/24-Bit HD Audio Playback via Coaxial Inputs
  • New Circuit Board Construction with Internal Struts to Reduce Vibration
  • Symmetrical Layout of L/R Channels
  • Separate Wolfson® 192 kHz/24-Bit DACs for L/R Channels
  • Four Large 15,000 µF Capacitors
  • 0.05" (1.2 mm)-Thick Copper Bus Plate for Perfect Grounding
  • Four Amplifier Modes (Integrated Amp, Power Amp, Pre-Amp, Split Pre-Amp/Power
A-9070
Power Output 
4 ohms2 x 200 W
Dynamic Power 
HICC80 A
Audio in/out7/2
Phono input
AWRAT (Advanced Wide Range Amplifier Technology)
DIDRC (Dynamic Intermodulation Distortion Reductio
Parallel Push-:ull Amplification Design with Three
192 kHz/24-Bit HD Audio Playback via Coaxial
New Circuit Board Construction with Internal Strut
Symmetrical Layout of L/R Channels
Tone control (Bass, Treble)
Separate Wolfson® 192 kHz/24-Bit DACs
Four Large 15,000 µF Capacitors
3 Digital Audio Inputs (1 Optical and 2 Coaxial)
3 Analog Audio Inputs and 1 Output
Customized, Gold-Plated, Banana Plug-Compatible
Machined, Gold-Plated RCA and Phono Terminals
Independent Headphone Amplifier
Amplifier Section
Power Output140 W/Ch (4 ohms, 20 Hz–20 kHz, 0.05%, 2 channels driven, FTC)
Dynamic Power
1 ohms450 W/Ch
3 ohms230 W/Ch
8 ohms100 W/Ch
Total Harmonic Distortion0.006% (Half power)
Damping Factor130 (1 kHz, 8 ohms)
Input Sensitivity and Impedance
Line150 mV/47 k-ohms
Phono MM2.25 mV/47 k-ohms
Phono MC0.18 mV/100 ohms
Output Level and Impedance
Rec out200 mV/2.2 k-ohms
Phono Overload70 mV (MM, 1 kHz, 0.5%)
Frequency Response10 Hz–100 kHz/+0 dB, -1 dB (1 W, Line) 1 Hz-250 kHz/+0 dB, -3 dB (1 W, 8 ohms)
Tone Control
Bass±10 dB, 80 Hz
Treble±10 dB, 10 kHz
Signal-to-Noise Ratio107 dB (Line, IHF-A)
Speaker Impedance4 ohms–16 ohms (A or B), 8 ohms–16 ohms (A + B)
General
Power SupplyAC 120 V, 60 Hz
Power Consumption3.3 A
Standby Power Consumption0.1 W
Dimensions (W x H x D)17 1/8" x 6 7/8" x 16 15/16" (435 x 174.5 x 431 mm)
Weight39.9 lbs. (18.1 kg)

Write a review

Note: HTML is not translated!
    Bad           Good

Integrated Stereo Amplifier, 140 W/Ch (4 ohms, 20 Hz–20 kHz, 0.05%, 2 channels driven, FTC) - A-9070

  • Product Code: A-9070


Vendor information


0 reviews / Write a review